Newbie here, thanks for reading.

 

Driver's power window not raising or lowering properly. Motor seems to be working, so I figured the regulator was faulty.

 

Removed the door panel and observed that one of the scissor arms --sturdy sheet metal--had sheared off near the center of the scissor mechanism.

 

Obviously it needs to be replaced, but I wonder what could have caused this ? I have noticed that upon releasing the contol buttons on driver's and passenger sides that the motor seems to still be going---this is only when the windows are being closed.

 

Looks like a few bolts need to come off to remove the old part...any tips or tricks to this procedure?

 

Thank you ,

 

Legacy Wagon 241K miles

I did one in my wagon a while ago and took a few pics. Ill have to see if I still have them. Not difficult to install but it's a pain in the rump roast to adjust everything properly after the new regulator is in.

Fairtax4me, thanks for the post. Photos and any hints on adjustments would be very helpful. I plan on installing the motor and regulator kit.