Hey guys I just recently purchased a 91' Loyale with 167k miles and the TOD from hell lol. Only paid 500 bucks and it drives like a dream. 5 speed manual shifts great. I have a front wheel bearing that is bad and I'm having trouble locating a good DIY post or vid. Found one but the pics had all been deleted. Pretty sure I can figure it out myself but some clarification I need is that there are 2 bearings per hub right?

Here is a video on how to remove and reinstall the axle. Once you have the axle out, the bearings are cake.

 

I had another video about the bearings, but the original file got corrupted, so i need to re-edit it.

 

With the axle out of the hub, use a drift to drive out the bearings from opposite sides. Driving out the bearing will drive out the seal as well. Then re-install the bearings with a drift, being careful to only place the drift on the out er race. There will be a spacer bit that goes between the bearings. Then install the seals. Refer to the video to reinstall the axle.

 

Watch the video and if you have any questions ask here.

Um I don't see a video lol.

Whoops, i forgot the link!