Have swapped to new carb and my brat still shuts off st like 1200 its like u turn the switch off? Whats causing this

Is this a coil issue, pickup, or what

Anybody have any ideal???

Does it do this hot/cold, under acceleration/stopping, turning left/right.. We need more info.

 

But off the bat, could be the pickup in the distro. Hook a timing light to the coil wire into the distro cap from the coil. Raise the RPM until it starts to give you trouble. Watch the flashing timing light to see if it cuts out, skips, ect.

Timing light shuts off with the motor at or around 1200 rpm and above that it runs like a charm

Does that sound like the pickup in distributor? Need any help can get to get it going

No one have any help?

The new pickup in dist was bad put old one in and shes doing good again