i have a 91 subaru legacy turbo..i have several broken connectors and hacked wiring on my engine harness from prior owner. i cannot source these connectors and cannot find a harness on ebay. i have found a harness for a 99 impreza outback with a 2.2 mt. will the connectors for that work on my motor? i can solder and fix most of my current harness but can't fix the broken connectors so was hoping to source them from another harness.

Post pictures of which connectors you need, or give the names of the components they go to. That may help determine if you can use plugs from another harness or if you need parts specific to the Turbo harness.

 

Another option might be to check the classified section here, and on LegacyCentral.

i have a 91 subaru legacy turbo..i have several broken connectors and hacked wiring on my engine harness from prior owner. i cannot source these connectors and cannot find a harness on ebay. i have found a harness for a 99 impreza outback with a 2.2 mt. will the connectors for that work on my motor? i can solder and fix most of my current harness but can't fix the broken connectors so was hoping to source them from another harness.

 

Almost every connector on the turbo engine is the same as the Non turbo ones.

i finally found the injector connectors from deatsch werks, but i need the coolant temp sensor (not sender) connector. those were the main ones i needed, but haven't gone through all my engine bay so there will more than likely be more i will need. thank you for all the info so far!