2.5LOYALE Posted April 7, 2014 Share Posted April 7, 2014 Ok so here it goes, i got my 92 loyale wagon it currently has a ej20 engine out of a JDM impreza with the ej 2.5L intake manifold and full obd2 readout all working. I put a 2 inch home made lift on it using front strut spacers from One Eye on the board. In the rear it has a modified strut with the lower eyelet of the strut cut off and a 2 inch piece of stock for the lift and then the eyelet welded back on all using the stock mounting points of the car. I have contacted scott from sjr to make some pieces for me to get this setup RIGHT and to be able to switch out struts and springs without any modifications. So here is what i am wanting to do, I want to get the brackets for the strut top hat to the body of the car from sjr Quote Link to comment Share on other sites More sharing options...
2.5LOYALE Posted April 7, 2014 Author Share Posted April 7, 2014 started a diffrent post TITLED loyale lift questions Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.