brighton98 Posted June 1, 2015 Share Posted June 1, 2015 Trying to replace front sway bar end links, but the nut turns the link shaft. There's no head on the other end, just four plastic "dots." Suggestions are appreciated, thanks. Link to comment Share on other sites More sharing options...
Fairtax4me Posted June 1, 2015 Share Posted June 1, 2015 Its a ball joint stud link. There will either be a hex or torx head on the end of the stud which you hold with a socket while loosening the nut with a wrench. Or there will be flats on the stud between the rubber dust boot and the sway bar or bracket which allow you to hold the stud with a wench. Needle nose vice grips also work. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now