Hey,

Can't figure out a short and very frustrated, wondering if there is a possible way to narrow it down... 

I've got an inline 15a fuse coming from the ignition to power the computer, coil, and fuel relay as depicted on boxer swaps.

http://www.busaru.com/subaruvanagon/wiringharness

The fuse keeps blowing and I'm not sure where or how to go about finding it. It happens as soon as I turn the key into the on position I can watch the fuse blow.

I drove the car around for half an hour and everything was fine, got 2 meters from my driveway and the car died.

 

I've tried unplugging the relays, looked for anything obvious but nothing and don't really know how to narrow it down...

Solved it. My wires are a bit short so the engine harness was touching the pipe that connects the intake and head on the drivers side. Melted the wires causing a short. Fully thought I was going to have to pull the harness.

Now I need to figure out some kind of heat shield.