jfulford1 Posted September 16, 2016 Share Posted September 16, 2016 Hello. I've got a 1998 Legacy Outback. It runs great. However, that's about it. The car was in a slight front clip accident(left fender, headlight, and Control Arm). What works: Headlights/taillights, blinkers, Dash lights. What doesn't work: Brake lights, Dome light, radio(2 months old), AC blower motor, has ABS light. What I've done: replace relay, Climate control panel, blower resistor; blower motor works with 12V on it. Checked all the fuses I can. There is voltage to the Blower relay, but not down the line. Flashed the ABS codes and it indicated left rear area; replaced ABS sensor and checked tone ring; no go. Also replaced front ABS sensor; no go. Note: AC compressor comes on when blower motor is turned on; just no blower motor. Anything else I should try? The car drives fine(now pulls to the right; needs alignment. Thanks jeff Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted September 16, 2016 Share Posted September 16, 2016 There main wire harness for the interior is behind the left fender. Possible there was wire damage caused by the accident. Did you replace the fender or did someone else? 1 Quote Link to comment Share on other sites More sharing options...
jfulford1 Posted September 16, 2016 Author Share Posted September 16, 2016 I replaced the fender; I did beat the core support down a bit to fit the fender better. jeff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.