desertdriver Posted September 20, 2004 Share Posted September 20, 2004 Greetings, I have a '97 Impreza 5-speed w/ a cable actuated clutch. The clutch release lever has cracked and will not disengage the clutch. I would like to know if it can be replaced through the lever hole. I have the two small bearing clips removed but can't seem to get the lever to un-clip from the fulcrum point. Any ideas? Thanks DD Link to comment Share on other sites More sharing options...
cookie Posted September 20, 2004 Share Posted September 20, 2004 have seen would require removal of either engine or transmission. Perhaps someone who has worked on your model will respond. Link to comment Share on other sites More sharing options...
Setright Posted September 20, 2004 Share Posted September 20, 2004 I am 98% sure the transmission should be taken out. The release fork is installed from inside the bell-housing during assembly. Link to comment Share on other sites More sharing options...
desertdriver Posted September 20, 2004 Author Share Posted September 20, 2004 have seen would require removal of either engine or transmission. Perhaps someone who has worked on your model will respond. Thanks for the quick response, this is a great resource. I'm still determined, I'll let you know if I get it out. DD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now