Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oily Residue in Breather? Cause?

Featured Replies

  • Author

After running about 2 miles, there were about 3, 4 tablespoons in the breather.

  • Author

Probably gonna do the compression test tonight ... what kind of readings are normal on the ea71's ?

I had this prob, and "fixed" it by installing a filter such as is found on a pneumatic compressor. the filter was inside a can thing with an inlet and outlet hose fitting. I simply installed this into the line, and emptied the oil in the bottom into the engine every now and again...

A little crude, but it worked..

  • Author

What line did you install this on? Did you eventually replace the rings ?

THe line going from the rocker cover to the filter box - this was an new zealand ea81 - very simple no emmisions, so yours may be different.

I havn't replaced the rings, the enigne is sitting in teh garage as the car is off hte road at the moment. I think a valve is at fault in my case (not seating properly), as the enigne had new rings only about 80,000 kms ago.

  • Author

We are going to do the compression test tomorrow ... so I'll let you guys know what they are. If it's not too bad, tags and insurance will go on it this week or next.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.