Jump to content
Ultimate Subaru Message Board

Recommended Posts

well if your radio area is anything like my 94 legacys,it's easy.

 

first pull out an remove the cup holder.you should see two screws that would have been behind were the cup holder went in,remove those and the molding around the radio should come off.before pulling that off remove ashtray or you might have a mess(if you smoke an have ashes in there of course)just about as you have the molding off,your gonna have a wire harness going to the ashtray for the light.easy disconnect.once you have molding around radio removed/on my radio there's about 6 screws holding the radio in(4 in the front,1 on either side towards rear.undo those then carefully disconnect wiring harness from back of radio and remove antenna wire. unless there's a wire i forgot about,you have just removed a radio.

9465S3010011-thumb.JPG this is what mine looked like when i had mine out.

hopefully your's is similar

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...