paulk Posted May 1, 2005 Share Posted May 1, 2005 This meassage comes from downunder (Australia). I have a prob with this scooby-doo. Variably it hesitates & surges from 2500 rpm upwards and it does not do it all the time, suspecting plugs/leads these were changed to no avail. Some research was done into the O2 sensor I disconnected and took it for a run no different about the same power, hesitation & surges etc. Re-connected it and it was much better but still not as good as it should be. I would be greatful for any ideas. I am now suspecting dirty injectors can anybody point me toward documentation explaining the process of removal of the injectors methods, processes, procedures and gotchas ect. Link to comment Share on other sites More sharing options...
nixon Posted May 2, 2005 Share Posted May 2, 2005 Have a look at the airflow sensor. Your problem sounds familiar. It can be cleaned,gently, or replacedcheaply[for subaru].It's quite a common fault on these engines, so worth a try. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now