Langdon Posted June 15, 2005 Share Posted June 15, 2005 Knights of Columbus, this is torquing me off! I bought a Rear Gate Bar kit for my 01 Outback after looking at the installation PDF online, and I thought the process was going to be a breeze. It turns out that several inches away from the outside body layer that I'm supposed to drill through there's a second layer of sheet metal and almost no way to reach that outside layer to put the nut and washers on. There's a couple of holes and wiring accesses, but I can't imagine reaching my hand back there, much less a ratchet and socket. Has anyone here had luck installing a Rear Gate Bar on an 01? It seems that the only instructions floating around online and with the kit are a wee bit out of date. I suppose I should be glad I didn't drill holes in my car! Link to comment Share on other sites More sharing options...
Langdon Posted June 15, 2005 Author Share Posted June 15, 2005 Sorry folks, lost my cool there... I didn't know the plastic housing that the carpet shell is screwed into popped out. Once it did it seems like accessing the bar's bolt won't be a problem. Now let's drill some holes... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now