d1camero Posted July 4, 2005 Share Posted July 4, 2005 I have an r160 from a 1995 Impreza. I am just bead blasting it, and want to remove the pinion before getting it full of grit. How to the pinion come out? The pinion nut is off. thanks d1 Link to comment Share on other sites More sharing options...
blackbart Posted July 4, 2005 Share Posted July 4, 2005 I have an r160 from a 1995 Impreza. I am just bead blasting it, and want to remove the pinion before getting it full of grit. How to the pinion come out? The pinion nut is off. thanks d1 You have to press it out, of course you have to remove the ring carrier first. I wouldn't do this just to clean it up, can't you tape off the nut area instead? When you go to put things back together you will have to check for backlash, the spacing between the teeth on the ring and pinion. This is done with shimms. (Don't take it apart.) Link to comment Share on other sites More sharing options...
NorthWet Posted July 4, 2005 Share Posted July 4, 2005 Messing with the pinion can put you in a world of hurt. Listen to what blackbart said. It is not worth it. Much better to mask of the areas that you are concerned about. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now