Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

quad light upgrade?

Featured Replies

Ok so ive been thinking (seams like this came up once before on the old board)

 

but i want to know what bulbs fit in the quad light gen 1's

 

i measured them they look to be 5.5in all i can find is 5.75 or 5's

 

i would like to put a real bright bulb in my high beams to use for rallying. and night driving.(as some of these roads you wont see another person for 100miles in teh day much less at night)

 

i also seam to remeber somone puting yellow bulbs in one spot (from bmw??) anyway any ideas......

Would it be possible to just mount some KCs or something in the holes where the stock lights go?

i've been toying with the idea of BMW lights... they used quad round headlights for many many years... and they seem bright... my uncles are pretty darn good...

 

i took a quick measurement but i think they will fit...

i've been toying with the idea of BMW lights... they used quad round headlights for many many years... and they seem bright... my uncles are pretty darn good...

 

i took a quick measurement but i think they will fit...

 

 

some guy over on the legacycentral board put bmw lights in his 1st gen legacy.. I thought it was ugly, but i figured I'd let you know

You can get non-sealed beam (like H4 or something) replacements for most (if not all) sealed beam lights. Not too expensive either. Then you can go to like, 120W per bulb. You want the number on the front of the light, ill look at the quads on my 79 later if you want.

You can get the proper size housings from JC Whitney for an H-4 headlight conversion. I did this to Eyesore, and am now able to run Sylvania Silverstar H-4 bulbs. The whole deal cost about $75. BIG difference.

 

If you wanted to lay out big $$, you can even do a H.I.D. conversion.

 

For Rallying, and extreme rural areas (like I was in,) I reccommend the H-4 conversion and KC's in concert. (BTW, I've found the $20each Walmart-special 6" spots to work/last quite well. I see no need to spend Hella, KC kind of $$ on lights. My .02)

HELLA has H-4's for the outside and H-1's for the inside about 50.00 a peice also a 4-lamp wiring harness with relays from A.P.C also 50.00 I have this set up on my 79' wagon and its very bright!

  • Author

could you post the part numbers of what you used in your hella convershion that would be great...

 

anyway thanks...

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.