busdriver Posted December 2, 2005 Share Posted December 2, 2005 Hello Fellow Soob People My blower motor is making a vibration and sounding bad. How hard is it to locate remove and go through this unit. I've had such wonderful luck rebuilding different things on my soob, and I think this unit needs my help. I beleive it's underneath the pass. side dash since thats where all the ruckus is coming from, and I haven't been able to tear into anything yet, just looking for some advice. Thanks Link to comment Share on other sites More sharing options...
fredrogers Posted December 2, 2005 Share Posted December 2, 2005 I changed out mine for a new one a few months ago. It was easy to get at. I pulled the plastic panel off the is right below the glove box. This exposed the blower motor. IIRC it had 4 10mm bolts holding it place and one of them also held the resistor pack in place. A replacement motor was 35 ish from checkers. -=fred=- Link to comment Share on other sites More sharing options...
busdriver Posted December 2, 2005 Author Share Posted December 2, 2005 Cool Thank you. I'm gonna work on it tonight. I changed out mine for a new one a few months ago. It was easy to get at. I pulled the plastic panel off the is right below the glove box. This exposed the blower motor. IIRC it had 4 10mm bolts holding it place and one of them also held the resistor pack in place. A replacement motor was 35 ish from checkers. -=fred=- Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now