valleyodsunstroke Posted October 9, 2003 Share Posted October 9, 2003 I have been battling two recurring problems for monthes now. I own a '91 AWD Legacy wagon. My first problem is with the clutch assembly. Approximatley 6000 miles, as I vaguely recall, I had a new pressure plate, throw-out bearing and clutch cable installed. When I attempt to disengage the clutch, the pedal is very difficult depress and I have to jam into the floor to shift. I also have 2-3 inches of free "play" in the pedal before it begins to disengaged. The mechanic advised me adjust the clutch by turning a nut associated with the clutch cable, but I need to adjust it every other day and it does not seem to help at all. As suggestions? Link to comment Share on other sites More sharing options...
sprintman Posted October 10, 2003 Share Posted October 10, 2003 Theres a TSB for this. New slave cylinder and hose/pipe I believe. Had mine done a week ago and fixed same problem as you describe. Got a new style clutch a few weeks earlier too so there are two seperate problems. Sube dealer did both for free even out of warranty. That's why I have a Sube!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now