bob393 Posted January 20, 2006 Share Posted January 20, 2006 Hi The electric choke just stoped working. I checked and there is no voltage at the terminal. I ran a jumper from an ignition source and now it works. Any ideas so I can fix it right? Thanks Quote Link to comment Share on other sites More sharing options...
85Sub4WD Posted January 20, 2006 Share Posted January 20, 2006 buy a cheap multimeter, and trace the wires back from the choke until you get 12V - is there anything else that stopped working about the same time? did you check the fuses? I do not know Justys well, but this is just a normal T-shooting proceedure good luck Quote Link to comment Share on other sites More sharing options...
bob393 Posted January 20, 2006 Author Share Posted January 20, 2006 Hi Yah I did the volt meter thing and kind of got lost in the cables. The fuse is good and nothing else stoped working. I was kind of hoping that perhaps there was a temp sensor in the line that I don't know about. I will do a full blown diagnostic this weekend. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.