Hurley Posted May 14, 2006 Share Posted May 14, 2006 So i just bought a 1992 loyale wagon and i need some info on puting a D/R tranny in it for 4x4ing. If you have any suggestions t'would be greatly appreaciated. Thanks, Justin Link to comment Share on other sites More sharing options...
SakoTGrimes Posted May 14, 2006 Share Posted May 14, 2006 I think all you gotta do is remove and plug the vaccuum lines coming from the engine then bolt the d/r right in. I hope to do the same when I can afford another 4x4 toy. Link to comment Share on other sites More sharing options...
WoodsWagon Posted May 15, 2006 Share Posted May 15, 2006 I used one out of a carbed car, and it was missing the nuetral position swich. If you can find one from a FI car, it should have it and will be a direct swap in. You will love the low range. How many miles on the clutch that's in the car? you might want to replace it while your in there. Link to comment Share on other sites More sharing options...
Hurley Posted May 19, 2006 Author Share Posted May 19, 2006 I used one out of a carbed car, and it was missing the nuetral position swich. If you can find one from a FI car, it should have it and will be a direct swap in. You will love the low range. How many miles on the clutch that's in the car? you might want to replace it while your in there. The clutch is brand new actually. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now