The blinking POWER light problem disappeared as suddenly as it had appeared. Over the last couple of weeks, the POWER light has not blinked at all on startup. It is clear that some contact/connection is the culprit and that the the transmission system is ok. Since I have no idea which contact/connection I should be looking at under the hood, I would appreciate any pictures that would help me identify them.

 

Thanks to all who helped before in troubleshooting.

 

sam

The transmission's connectors are the 2 large rectangular-ish ones just rearward of the engine/tranny "dogbone" link to firewall. There is also one minor connector (off of the tranny's harness) along the side of the tranny for the rear speed sensor