Quest Posted November 11, 2006 Share Posted November 11, 2006 I have a Subaru 2001 Legacy L Sedan and when I returned to it tonight, the alarm indicator was flashing. The good news is no damage... the bad news is that I cannot reset it or turn the alarm on. I have tried following the manual instructions of opening the door and going from lock to on twice followed by closing the door and going to on. This did not work. Please help! Quote Link to comment Share on other sites More sharing options...
Quest Posted November 11, 2006 Author Share Posted November 11, 2006 Whoops... It was accidentally put in valet mode. Valet mode or alarm off: alarm light (red dot center dashboard display) rapidly flashing 3 times means the alarm is in "Valet" mode and is not setable. The light will stop flashing when you start the car. To set valet mode or just to disable the security alarm system: 1. unlock all doors 2. physically open the driver's door 3. hold the UNLOCK button on remote for 2+ seconds or so. The red 'security' light will then flash 2 times a second until the car is turned on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.