sickofitall1113 Posted November 21, 2003 Share Posted November 21, 2003 how do you do this, i tried it and its wayyy harder than i thought it would be, if anyone can give me step by step instructions i would be very grateful, i have a 95 impreza fwd 1.8, thanks in advance...gerry Link to comment Share on other sites More sharing options...
1ABAJA Posted November 21, 2003 Share Posted November 21, 2003 Hey bud, I wish I could help, but I was thinking of installing that myself...how much did it cost you? Josh! Link to comment Share on other sites More sharing options...
ferret Posted November 21, 2003 Share Posted November 21, 2003 I installed an aftermarket in my 02 Forester....IT's Great....Paid $20 for it on Ebay. Just took off console/boot and knob. Unbolted shifter actuator from shifter. Now here's the "hard" part...Popped the old shifter ball out of it's socket. Kinda like removing a 'turkey' leg. Used a Screwdriver in the bolt hole for leverage. Popped the new one in with a tap from a rubber mallet. Then put it all back together....15-20 minutes. Did it over a year ago and haven't looked back.:-p Link to comment Share on other sites More sharing options...
sickofitall1113 Posted November 21, 2003 Author Share Posted November 21, 2003 i got it for like 13 bucks but they ripped me off with the shipping, it was like 13 also, anyway, i know how to do it and all, but how did you get the "ball" out of the top of the transmission, i pulled as hard as i could and nothing.... Link to comment Share on other sites More sharing options...
ferret Posted November 21, 2003 Share Posted November 21, 2003 I put a large screwdriver thru the bolt hole from the transmission actuator. Then used a book or something to use as a fulcrum, then 'poped' it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now