Guest johnd911 Posted July 11, 2003 Share Posted July 11, 2003 what it does: shows 1/2 of actual fuel level what I did: took out both senders many times, the contacts were cleaned, the wiper wire(spring) is intact and complete. all connections cleaned and are making contact. What do I do? I have a single sender from a 2wd, will that work? AND sometimes it shows empty before SLOWLY drifting back to the 1/2 acual reading/ ALSO I changed the low gas level bulb and it still never lights up. I have lived with this for 200,000 miles I just would rather the thing be more stable. HELP & thanks Quote Link to comment Share on other sites More sharing options...
Guest Cougar4 Posted July 11, 2003 Share Posted July 11, 2003 Since you have checked the senders and found no problem then you may want to check the gauge. It may have a problem. I think there is a voltage regulator in the circuit also that could be a problem. I would get a service manual to help with problem. Glen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.