Danbob99 Posted January 30, 2004 Share Posted January 30, 2004 in our shop at smart service subaru, we came across a customer that wanted a HG job done on their forester. in doing the hg's we found that there was a small amount of blow by on the number two cyliner. In removing the cylinder we found that it was one thousandths of an inch out of spec, whic is a very small margine. well, with our liability issues, we opted to replace the engine, instead of replacing the piston rings as we had wanted, and we have now, a reasonably good engine on our shoop floor. Today we got word back from the customer that they no longer wanted to keep the engine. So on its way to the scrap pile, i grabbed hold of it. so i am now in possesion of the engine. The engine: EJ-25 Pase 2 2.5 Out of spec on 3 of 4 cylinders by exactly .001" blowby on piston 2 It's just the short block, no head or anything else. pistons included If you are in the seattle area, contact me, and we will work out a deal, if you are a ways away, its up to you to get it from me. Take this thing off my hands! Dan Quote Link to comment Share on other sites More sharing options...
Danbob99 Posted January 30, 2004 Author Share Posted January 30, 2004 sorry bout putting this one here, should have put it in the new gen. Move it if need be, i would, but i don't know if i car, or know how. Sorry, been a long week Quote Link to comment Share on other sites More sharing options...
calebz Posted January 30, 2004 Share Posted January 30, 2004 Once again, I am kicking myself for moving from washington... Quote Link to comment Share on other sites More sharing options...
Danbob99 Posted January 30, 2004 Author Share Posted January 30, 2004 come on, somebody's gotta want this thing. if no one wants it, its going to end up in the scrap heap, i gotta do something with it before tomorow night. Quote Link to comment Share on other sites More sharing options...
Hondasucks Posted January 30, 2004 Share Posted January 30, 2004 Post it in the paper or sumpin.. Did you try NASIOC?? Quote Link to comment Share on other sites More sharing options...
Subie Gal Posted January 30, 2004 Share Posted January 30, 2004 i can come and pick it up if it's free. i'm in kirkland. jamie@subiegal.com hehehe.. u know me i stock up on spare scoob bits.... cuz you never know.. when you might need em meanwhile... posting in the Northwest forum on http://www.nasioc.com = a good idea! Jamie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.