Welcome to Ultimate Subaru Message Board, my lurker friend!
![]() |
Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created. We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning ** Not an actual guarantee, but seriously, you probably won't regret it! Serving the Subaru Community since May 18th, 1998! |
Guest Message by DevFuse
Recent service involved 3 recalls.
Started by
subaruplatt
, Nov 03 2012 01:27 PM
3 replies to this topic
#1
Posted 03 November 2012 - 01:27 PM
1 Fuel one way valve gasket replacement.
2 ECM-Reprograme.
3 Inspect and punch test lower control arms.
I had known about the fuel valve recall for some time but hadn't bothered to do it.
The ECM re-flash is the second time the firmware has been upgraded on this car. I was told that this one improves the environmental performance of the car. http://www.google.ca...2YU6f8ev853_tpQ
Because my front control arms were "like new" they rustproofed my front end instead of replacing anything.
Nice just in time for winter:headbang:
2 ECM-Reprograme.
3 Inspect and punch test lower control arms.
I had known about the fuel valve recall for some time but hadn't bothered to do it.
The ECM re-flash is the second time the firmware has been upgraded on this car. I was told that this one improves the environmental performance of the car. http://www.google.ca...2YU6f8ev853_tpQ
Because my front control arms were "like new" they rustproofed my front end instead of replacing anything.
Nice just in time for winter:headbang:
#2
Posted 03 November 2012 - 06:37 PM
What vehicle was this on?
#3
Posted 07 November 2012 - 10:21 PM
What vehicle was this on?
2006 Impreza wagon.
Car runs richer initially then idles down quicker and I feel the car warms up quicker as well.
Seems like it took a while for the ecu to trim. Initially the exhaust had a rumble or louder note when cold. I'm not sure it might have gone away?
Ran fine at 122 KMH for 1 hour. Smooth as silk when I put to bed.
#4
Posted 13 November 2012 - 10:07 PM
2006 Impreza wagon.
Car runs richer initially then idles down quicker and I feel the car warms up quicker as well.
Seems like it took a while for the ecu to trim. Initially the exhaust had a rumble or louder note when cold. I'm not sure it might have gone away?
Ran fine at 122 KMH for 1 hour. Smooth as silk when I put to bed.
Now the ECU has had time to learn, the start-up mixture is somewhat leaner ( nose test ), and the idle down is quicker. Also I would swear that my warm-up time is sooner, the idiot gauge thermometer rises in just a few blocks. The auto for what it is, also seems quite smooth, is it possible that instead of delaying lockup as was previous for warm up purposes they are revving each gear a bit more instead?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users










