my 2000 legacey just went over 100k miles. the book calls for timing belt replacement at 105k. any body out there ever have it done. know about what it should cost? thanks.
I checked the backing plate, cleaned the brakes and lubed the pins and areas of the pads and shim. when I straighten out the wheel(while driving) the noise goes away. when I go into a turn I hear a sqeeking and feel vibration and scraping noise. Its drivin me nuts. I hate to But I think I might take it to the dealer. Thanks for the feed back . ed
thank you for the help, I drop out the ball joint and sway bar, all went together well. putting the ball joint back in was tricky but i was able tto do it with the help af a floor jack. thanks again.
i've removed the axle nut, and the diff side pin and tie rod end and the axle is loose at the hub and diff. but there doesn't seem to be enough room to slide the axle out
hello everybocy, this is my first post. I'm trying to replace my front pass side axle and it won,t come out. I have everything off inc. tie rod end, it seems the axle is too long to remove, any suggestions? thanks