NWScooby
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by NWScooby
-
-
I use the Monster brand FM modulator with my iPOD in my '98OBW and it works fine. One thing that helps a lot is to retract the antenna on the car if you have the capability. Makes the outside signals weaker making it easier for the device to work.
-
Thanks to both of you.
Subiegal, I will let you know if I decide to go the new route.
Americanyouth, I will wait to hear what you can find.
-
The quick story...Driving home on Hwy 101 off of I5 in the Olympia, WA area last night, a dog was running across the highway. Needless to say the poor thing connected with my driver's side driving light (lower bumper light). I am sure it died instantly since we were going 60 mph. (sad face on subject is for the dog....not the light).
There was no other damage, but the glass and plastic "rock guard" are destroyed. I am now looking for options on replacing the light. Anyone price one from the dealer? Ever pick one up from a pull-a-part yard? Or should I replace both lights with something completely different?
-
I have a set of snow tires on steel wheels that I put on in the winter. We don't get much snow usually, but black ice is pretty common. The tree farm we usually go to gets pretty muddy
and I love taking my OBW down into the worse areas. Luckily only pickups and SUVs go in those areas, so there tends to be more trees to choose from. Snow and mud can be so much fun! -
I have an exhaust leak that the header systems I have seen should take care of. I have only seen these listed for the '98 Legacy GT 2.5L. I am wondering if there are any differences between my OBW and the GT of the same year, same engine that would cause issues with the Borla header being a direct bolt on.
-
I got mine last weeked too!!!!!
Nice job, the calander is very cool.
-
I bought a 98 OBW a year ago, and have been really happy with it. Mine has the 2.5L which I think was standard. It has the 5spd. I just had the 90K mile service done, and it came out with a clean report.
3K seems low to me, but without milage and all that other info, it is hard to say if that is a good price for that car.
-
I went in for my 90K service and the dealer told me I have an exhaust leak and will need to get it taken care of. He told me to go somewhere else too since they would charge a minimum of $1000. Nice to see the dealer trying to help out.
-
Just had my '98 OBW through the 90K service, and it came back with a clean bill of health. I could have done a lot of it myself, but I have other things I would rather spend my time on.
The only thing noted for future concern is there appears to be some type of exhaust leak. I hear it all the time, but I attributed it to the piston slap mentioned so often. The sound can be heard any time while accelerating (warm or cold), and after really listening, it did remind me of the sound I got off my old '75 Ford F250 I used to own (now that had an exhaust leak!). Dealer recommends aftermarket to replace it when I want to since they said it would be over $1000 for a factory replacement. So, the question is, what system is recommended to provide a little better breathing for my OBW, and where to get such a system. I am on the West Coast (Washington State).
-
I believe that is part of the air intake system. Not sure how vital that piece is, but I would fix it to keep the proper air flowing for the engine.
-
Brian, Did you get my check? I noticed it has yet to clear the bank, and am wondering if it ever made it to you.
-
Well, my 98 OBW has on a couple of occassions suffered from a very high idle first thing in the morning. Now, this is not just the cold engine higher idle till warm, this is more like 1500 to 2000 rpm. The first couple of times it happened, it went away after a short time (a minute or so, or after a firm press on the gas pedal). I thought at that time that it was just warming up, but this last week, it did this for approx 10 minutes. I had to drive off and get my son to school, and get myself to work. While in gear and driving, things seemed normal. As soon as I pushed the clutch in, the engine went right back up. In fact, on a level surface, the idle was high enough to keep me going 25mph without applying gas. It finally settled down, but it has me worried.
Anyone experience this before? Any ideas? Like I said, it is a 98 OBW. Has the 2.5 and 5spd.
-
LOL! True, but my wife would not be...............happy.
-
I wish I lived closer! I have a '98 OBW that I would love to put a light bar around the front bumper area. I guess I will wait until you get pics posted and go from there.
-
Dropped the check in the mail (actually went to a post office!).
Should receive in the next day or two.
-
Hey Brian. My check is going out in tomorrows mail (for real this time!). I had a major brain fart, and spaced it. Sorry for the hold-up on my part.
Tim
-
I will send my check soon, and the change can go to the board.
-
I bought a set of four steelies with Yokohama Gaurdex 600's (studless snows) mounted (got them off e-bay for $187 and no shipping since I picked them up). Got to try them for the first time last night. We got between 2"-3" of snow in Tumwater, and these tires felt great on my '98 OBW. They had approx 80% tread left when I bought them, and I put them on this last Sunday.
-
I am so glad I posted the disclaimer!
I have mentally noted that as an idea that has no merit, and will never suggest it again (except in jest;) )
-
Put me down for one calendar. Drop me a note with payment info and I will send an address to ship to.
-
*****DISCLAIMER******
I have not tried this before, but got this info from another board with members who have successfully done this with their headlights. Anyone who attempts this is solely responsible for what happens.
*****DISCLAIMER******
There is an adhesive keeping the lens to the housing. On another board, people have taken their headlights and baked them in the oven (200 degrees for 5 minutes).
Once removed, slowly and carefully pry the lens from the housing using a flat head screw driver.
Do whatever cleaning you want to do, etc.
When finished, bake in the oven again at 200 degrees for 5 minutes, and then put the lens back on the housing. (this is supposed to melt the adhesive again a bit and make it so it can reseal). Several people also add a sealant to the joint to make sure all is sealed.
If it works, let us know!
Just a reminder:
*****DISCLAIMER******
I have not tried this before, but got this info from another board with members who have successfully done this with their headlights. Anyone who attempts this is solely responsible for what happens.
*****DISCLAIMER******
-
-
I have not been able to find this info quickly, so I am asking the technical brains this one.
I have a '98 OBW, and I am wanting steel wheels for it. Does anyone know if the steelies from a '01 Forester would work? I have a lead on some for sale with snow tires, and the tires are the same size as I have on my OBW.
-
I wonder if mine one of the "spot on" entries..........the wait is going to cause trouble.
Hello iPod users?
in 1990 to Present Legacy, Impreza, Outback, Forester, Baja, WRX&WrxSTI, SVX
Posted
The Monster FM modulator I use also charges the iPod. Part of the reason I didn't get the iTune. I have an aftermarket head unit in my OBW, and the adapter plug I would need to get is around $65. Unfortunately, the car is ready for a timeing belt, so the iPod will have to wait on being hard wired.