Jump to content
Ultimate Subaru Message Board

kinasabi

Members
  • Posts

    17
  • Joined

  • Last visited

Profile Information

  • Location
    levin
  • Vehicles
    I Love My Subaru

kinasabi's Achievements

Member

Member (2/11)

10

Reputation

  1. swapping a 99 legacy ej20TT auto motor into a 94 legacy,any help out there,already noticed the heads are different was going to use my manifold maybe i can bolt the 94 heads on to the 99 block:eek:
  2. hi im looking 4 the torque settings 4 the head and camshaft bolts any help appriciated
  3. thanks i think thats wat i did installing the first one it made a pinging noise asi was tightening the bolts but i thought it just was just going on 2 the locater tabs thanks again:burnout:
  4. hi i decided on putting another auto trans back on jus took old 1 off with mtr in and noticed dots on axle gear and andtrans drive gear wat is the importance of lining these back up;)
  5. swt jus got trans out do the dots on the axle gear and the cog on the trans have to line up wat are they for
  6. will i b able 2 put 5speed off 96RS on to a 95GT auto is there a bearing?looks like a lot more room on the rs do i hav to take mtr[mtrs] out.....again
  7. na no flow is that the pump is it will i have 2 drop mtr again 2 fix and how:dead:
  8. thought the prob was mixing the oil up but i have no flow from the hoses that go 2 radiator wat would cause this could it b the oil or the pump in the trans would i have 2 take mtr out again 2 fix pump and how new 2 this so finding it a bit hard 2 reply so thanks 4 any input if i cant get back may b i should jus put 5speed on and do away with the auto::-\ should b fun
  9. thank s 4 all the advice every 1 wat i did was use donor moter as old 1 was cooked the tras was fine if nothing wrks i have 5 speed out of 96 rs i could use any probs that u know of apart from the obvious
×
×
  • Create New...