Skysm182

thanks for your replies, I will test the motor via car battery. I will most likely end up getting a used rail/track and motor(if it is bad) from the junkyard tomorrow.

Bump... please help

Hi everyone, I recently bought a 91 Loyale Wagon, 4WD, Manual. I got most of the kinks worked out in it but I need help with the passenger auto seat belt.The seat belt light is always blinking when I drive. The driver side auto seat belt works, the relay by the passenger side seat belt motor works (I unplugged the relay and the drivers side seat belt stopped working, I plugged it back in and the drivers seat belt worked again), when I open the passenger door the interior light does come on so the door dinger button works. I unplugged the passenger side motor and plugged it into the drivers side connection and tried to test the motor that way but the motor drive wouldn't spin, so I think the motor is bad. Would a bad motor trigger the seat belt light on the instrument cluster? Also, I am able to grab the seat belt connector and move it along the track with some resistance. I am going to a local pick n pull to get some stuff on this Saturday, so before I go I want to try/check everything I can before I start just replacing parts. Where should I check next? Is there anything under the dash? under the seat? I want to permanently fix this (no unlatching the belt to get in and out and no replacing the belts with non auto ones). feel free to ask me any questions and thank you for your help and input.

Hi all, i am new here. same thing happened to me. took it to autozone to check the alternator and sure enough it was bad. replaced it, and the charge battery, stop lamp, and brake fluid lights all turned off.