Jump to content
Ultimate Subaru Message Board

wesmay

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by wesmay

  1. random shot, I had a similar problem with a jeep, try cleaning the contacts on your map sensor. For whatever reason it messes with the fuel delivery. Good luck
  2. Thanks for all the input! Yes I swaped back to NGK a little better put still rough, runnning Seafoam now fuel filter and o2 sensor are next and looking into OEM plug wires. keep you posted.
  3. have a forester 02 with 120,000 started to mis at idle but ran better at 2500 rpm. error code showed 3 and 4 misfire, put on new plugs, Bosch, ran perfect for two weeks then started to run rough at idle again, replaced wires runs good at higher rpms but still idles rough and lacks power. today I checked ohms at coil and show 14 across 1,2 and 3,4. I see that this is not something new but looking for advice. thx.
  4. New here. I have read alot of great feedback on different issues so I thought I would give my problem a shot. 02 forester started missing at idle, runs smooth at 2500 rpm. error code shows missfires on 3 and 4, swapped out plugs with bosch, problem gone for two weeks then started to run rough again. put in new wires and it runs ok but still lopes at idle and runs fine at about 2000rpm. Engine light on or flashing constantly.

    also check resistance on coil showed 14 across 1,2 and 3,4.

×
×
  • Create New...