dudesmccool

Just nervous about getting power to the harness correctly so I don't fry it

Text Will@ 5035979371

I'm pretty close to finishing the harness, but I need some help. Is anyone available in the Portland metro area to help/assist me with finishing it up? Money or beer for trade

I'm looking for the alldata 1996 2.2 ecu pin layout with complete numerical list. Does anyone know where I can find it?

I'm looking for the alldata 96 song 2.2 ecu pin layout with complete list. Does anyone know where I can find it?

I'm looking for the alldata 96 song 2.2 ecu pin layout with complete list. Does anyone know where I can find it?

!Need wiring help! what do I need to keep/cut? B36 black Instrument panel harness B37 clear B38 brown B39 blue - do I need this for wiring up to the gauges/etc? B61 clear Front wiring harness B62 clear B77 brown Mode actuator B79 grey Check connector B80 blue Instrument panel wiring harness B82 black Diagnostics connector

Then yes I soldered it

Finished brazing the copper elbows on the radiator last night. Looks sealed and a direct angle to the engine

Modified my lower ea radiator inlet last night. I brazed a 1" copper elbow on

Well the upper radiator hose is connected. I cut 1" off of the ea hose and put it on the upper outlet. I cut off 1" off both sides of the ej hose and clamped it down on the ea hose. Feels secure

Today I'm going to start tackling the coolant hoses. I already purchased a torch with silver solder(plumbing). Now I need to find some pics for reference and buy some copper elbows to braze.

Off-roading is like anal, it's not supposed to go there, but it feels so, so good

Keeping B75-B78. Not sure about B79 or B82

Wiring questions (96 Lhd ej22): B75/76 test mode connector green B77 mode actuator brown B78 data link connector yellow B79 check connector grey B82 diagnostics connector black Do I need any of these in the swap?

Wiring currently under way. Green tape means GO, red tape means NO

I bought my adapter plate from SJRlift in Bellingham, WA. No d/r, that will be a present to myself in the future. Right now I wouldn't use a d/r enough to justify the price and labor.

It takes a patient and understanding wife, or just BEND the truth a little.

I have a thread on my painted engine bay, but since we're already here

I know everyone on this forum is a sucker for A: pics and B: swaps and actually C: everything awesome. I do have A and B thought. Last year I painted my engine bay+, lost my job-, moved+/-, became even more broke-. Now resealed most of the engine+, installed re-drilled flywheel+/-(I over paid) new clutch disk+ and xt6 pressure plate+. Last weekend my awesome brothers and I bolted the 96 EJ up to my 92 Loyale+++. Now I'm tackling the wiring and cooling. Sorry the pics are so blurry guys

I need the Nissan t/o bearing for my ea/ej swap, but is it from the 2l or the 2.4l. Size? I have searched the forums, but no one specifys which one

Fox, Where can I buy some if I can't find them?

I think I lost my timing cover bolts for my ej22 (it's been about 6 months since I've worked on her). Embarrassing as he'll, but can someone send me a pic of what they look like. Thanks

Thanks guys

So, I can't find my manual anywhere. I'm doing a re-seal on my 96 2.2 and need to know if I should add rtv in addition the the throttle body gasket. thanks for your assistance -Dude