larryelamjr

Don't want to steal this thread, but I cry everytime I watch Fox news.

I put one on my 02 Legacy Wagon. The receiver part is 9 or so inches long. The body of the hitch sits just below and well behind the bumper. Etrailer had some of the best prices on the net, but look for free shipping if you can find it. The total package is 40lbs so shipping costs can be up there. The hitch install went, well, without a hitch. I still have to hook up the wiring, but that is a post for another thread.

My 02 Legacy has stickers on the drivers door panel and in the glove box with the last change date for the filter. Look for stickers in the obvious places, and if there is one installed, it should be noted.

goo gone or plain old isopropyl alcohol will do the trick. One thing to note is that you need to let the stuff stay in contact with the adhesive for a while to do its magic. If you wet a paper towel or piece of rag with the solvent and stick it over the remaining adhesive and let it sit there for 5 min or so. If the rag is wet enough it will stay stuck on its own. After the egg timer has gone off, take the rag off and use a clean rag or towel soaked in the solvent to take off the sitcker. Repeat if needed. After its all gone, a quick wash down with some dish soap and water will take care of any leftover solvent and keep the area from attracting dirt. Hope this helps

Love my Subie, wife does too. Probably too much. I'm going to have to start rationing her time with my car. It's getting harder and harder to get it back. The only thing on my side is the MT. She hates shifting. I got it with 30K and have put on 10K in short order. Greak kayak hauling vehicle!!