ANDYGREEN

MAY

OOOOPSIFORGOT THE BOLTS SHOWS SOME EARLIER MODELS HAVE DIFFERENT PART NUMBER 800213010 FOR SOME EARLIER OR 800213030 FOR THE REST

HMMM I THINK (THEREFORE I AM ) THAT THE CRANK PULLEY IS THE SAME IF ITS A LATE 89 PART# 12305AA121 AND CAM POS SENSOR ARE THE SAME PART # 22056AA002 HOPE THAT HELPS ANDY:burnout:

22053AA010 IS CRANK 22056AA070 IS CAM SORRY:drunk:

NO WORRIES MATE LET US KNOW HOW YOU GO IM ALWAYS INTERESTED IN THE OUTCOME:drunk:

WELL HERE'S MY TWO CENTS WORTH...UNFORTUNATELY THEY ARE AUSTRALIAN CENTS WHICH ARE WORTH VERY LITTLE...BUT HERE GOES ANYWAY..... COULD BE :1 REAR MAIN SEAL 2 SEPARATER COVER AS MENTIONED BY YOURSELF 3 REAR CAM BLANK COVER O RING OR 4 IF THE BLOCK HAS BEEN SPLIT IT MAY HAVE NOT BEEN REASSEMBLED CORRECTLY THATS OFF THE TOP OF MY HEAD HOPE THIS HELPS

BEEN USING THOSE HERE ...BUT AM STILL EXPERIENCING PROBLEMS...THEY DO WORK WELL BUT IM DAMNED IF IT'LL DO MY SOOB..

have the same problem with my 2.2 have had no joy with incline bleeding... still looking for an answer...am thinking about fitting a tee piece in the "higher" heater hose ... i dunno yet but am desparate for a "good" fix that will give me a good result every time i change coolant...

IF ITS A 2.2 LITRE IT IS A NON INTERFERENCE ENGINE... CRANK AND CAM SEALS SHOULD HAVE BEEN DONE LAST TIME TIMING BELT WAS DONE (EVERY 100000) OIL IS PROBABLY COMING FROM CAM OR CRANK SEAL....NOT TOO HARD TO DO

DO YOU NEED TO ?IS IT WEEPING ?

JUST BUISSNESS HOURS WOULD BE GOOD NSW ONES DAMO

YOUR PART NUMBER FOR THERMOSTAT IS 21200AA072 $27.50 RETAIL GSKT PART NUMBER IS 21236AA010 $4.40 RETAIL PLUS FREIGHT (AIRBAG ???)I HAVE TWO IN STOCK IF INTERESTED

EMAIL ME AT AGreen@domsmotors.com.au if ya need anything ..... do ya get cool weather there? i lived in katherine for ten years and never had a bloody cool day

I WORK FOR A SUBARU DEALER IN GRIFFITH NSW ...HANDY HEY.... IF YOU EVER NEED ANY HELP GIMME YOUR VIN NUMBER CAN GET ANYTHING....ISH

SOUNDS THERMOSTAT(ISH) IF WATER WAS COLD AT RAD IM IN NSW IF YOU EVER NEED PARTS AND MY LIBERTY HAS 354000KLM ON IT WITH JUST TWO NEW HEAD GSKTS AT 250000KLM ----GOOD CAR LOVE THE 2.2ENGINE

SHOULD BE ON THE BACK OF THE WATER PIPE RUNNING ACROSS TOP OF ENGINE THERE ARE TWO JUST TO CONFUSE THINGS ONE ON RH SHOULD BE THE SENDER.....

update........ all waterpump part numbers go to 007 from 004 005 006 so your pump should be okgive me your vin number and ill see if i can find out

hell no just unplug, unscrew and replace

its on the passenger side of the casing you will find two similar looking switches the frnt one is reverse light and the rear one should be your neutral switch part number should be 32008 AA 103 ABOUT $AUD50 AND YOU GET TO IT UNDERNEATH

YEA THEY DO OK THEY ARE HELD AWAY FROM PAINTWORK BY DESIGN

THOUGHT IT WAS 15208AA031 FOR AN H6

FOUND IT IF ANYONE IS INTERESTED ?????????Anyone Had Problems With Hesitation On New Model 2004 OR 2005( Liberty ) Legacy In The U.S. I Believe 2 X 2004 Models Here In Australia That Ive Heard About Sounds Very Similar To The Older Models Problem WITH KNOCK SENSORS Need Help