[Tranny - help needed]

Yeah i gues u right

 

I'll bet a Phase 1 headgasket that sregor13 was concerned about seeing only two wheels on the ground in tow, which is a big problem on AWD subies. Not a problem on your FWD one though, so that's my guess at the "what?"

 

 

Zeky:

 

Thanks for the well documented follow up, it's nice to have resolution and lots of threads just kinda trail off.

Steve

[Tranny - help needed]

Nevermind I had to go back and see if this car was a FWD. It is. So nevermind. Thanks

 

What?

[Tranny - help needed]

Hi,guys.So thanks to u all my car is back on the road

I bought both diff seals at NAPA and i didnt change the o-rings cose Subaru Dealer was able to got them in five days .This is to long,car was 3 feets high and i cant wait.Now is all back together and its running well :cool:

I think this job(tranny swap) is not as difficult as i thought cose in this 91 Legacy AT is enough place to reach for all bolts and nuts.Only pain is remove the driveplate-to-torque bolts and then switch the tranny without any damage.

My first experience like this end up good.

Once again ,thanks a lot to all of you guys.Love this forum.

And Zefy i didnt try to stole your nick .In fact my is much better

 

umm and here are some pics

 

Last ride

 

work work work

 

not high enough

 

tranny out

 

see throught car

 

back on wheels

[Tranny - help needed]

You will need a new seal and a large o-ring pn #806730031.

 

Can u tell me where u got this from? I tried NAPA, Autozone,Advance AP. And no luck....

THX

[Tranny - help needed]

Ok, so here i am again.Guys can you please tell me how replace two sealings around transaxle studs? I just pull out old tranny and pull old studs but i need replace those sealings.They are from inside.So how to do this.The old ones are damaged.I tried remove the ring on the old tranny. It seems to hold in place by one bolt.Removed bolt but it still holding in place.

Help please......

[Tranny - help needed]

Thanks guys for grade info.Today im starting removing old tranny.I'll post later how it goes.Thanks a lot.

[Tranny - help needed]

So i took some pics to explain my problem.

 

Clik for bigger pic

 

 

[Tranny - help needed]

Guys, if u didnt understand what im asking for, just let me know.

 

 

I REALY NEED TO KNOW WHAT TO DO ,PLEASE.

[Tranny - help needed]

Hi guys.My 92 Legacy 2.2 AT FWD tranny broke 2 weeks ago.So i orderd a used one from junk yard for 530 bucks.When i got my "new" tranny home i found out ,the studs which are normally comming out of the diff arent there.Only two holes lookin at me on both sides of differential.

So ,questions:

 

1. Is it normall?

2.Can i just use studs from my old tranny .If so HOW?

4.Or just replaced whole diff?What i need to know to do that?

 

Sorry for my ENGLISH .Hope u understand what im talking about.

Thanks for help

I'll try to post some picures later