Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Knock sensors... Any suggestions?

Featured Replies

Hey ya'll, It's warming up so that means it's time again to work on my Subaru. I got a lot of help last Summer while doing engine swap and really appreciate everyone's knowledge.

My current issue: I need a new knock sensor for my 1986 GL-10 EA82 turbo. I have a knock sensor for an 88' GL-10 that came off the engine I swapped in. Is there any way to rig a different knock sensor into this engine? The knock sensors for this specific year are upwards of $150 (ande near impossible to find used) whereas the other years are less than half that price. This seems to be my last issue with this car (until I drive it around some more) so I really don't want to sell it if I'm close to working it out.

 

Anyway, I will gladly take your suggestions.

Hey ya'll, It's warming up so that means it's time again to work on my Subaru. I got a lot of help last Summer while doing engine swap and really appreciate everyone's knowledge.

My current issue: I need a new knock sensor for my 1986 GL-10 EA82 turbo. I have a knock sensor for an 88' GL-10 that came off the engine I swapped in. Is there any way to rig a different knock sensor into this engine? The knock sensors for this specific year are upwards of $150 (ande near impossible to find used) whereas the other years are less than half that price. This seems to be my last issue with this car (until I drive it around some more) so I really don't want to sell it if I'm close to working it out.

 

Anyway, I will gladly take your suggestions.

Hi,

i know what you need but don't have one. info i bought a jdm turbo imported motor for a car and the motor had that white one, has 2pins yes? point is the motor was newer than 86 i think, jdm might use that type more years. if you can go to an importer for jdm subaru engines (nissan had some common pieces with subaru ? they might have one they would sell . they might be common and cheap in japan- ebay there. someone here probably has one if they see the post. hang in there. i would not advise to wire in the other type, if i had an 86 manual set i could help more but 87 on is different in US.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.