need clutch replacement thread 90 leg

[madkow007]

Hello out there

I've been looking for a thread on installing a clutch, but can't

seem to find any info.

can anyone point me to a thread that hopefully has a few pics or at least

tells a person where to start?

from what I've found...every one says it's easy but thats about all the info I can find.

Thanks for any help you can give me.

MOOO

[Fairtax4me]

Two ways to go about it. You can pull the engine out the top with an engine crane, or drop the transmission out the bottom with a large floor jack.

This guy has a writeup with pics for how to remove the engine, as well as a pictorial for replacing the clutch with the engine out.

 

http://beergarage.com/Subaru.aspx

[Fairtax4me]

If you would rather do it the transmission way it takes a few less tools, but you still need very large jack stands and a large floor jack. You need about 19" of clearance under the car to be able to slide the transmission out of the way. It also helps when you install the clutch disc and pressure plate to be able to sit under the car.

[MilesFox]

pull the motor out. mkes life easier, you only need to pull it up about 2 inches and forward 4 inches to do the sork. yo can leave a lot connected thie say, but yank the whole thing and do engine seals while at it.

 

legacy engines are simpler to pull than the ea stuff, less overall individual connections