Im looking at this clutch kit for my '90 Loyale wagon, ej20G and ej 5 spd awd swap.I would appreciate any opinions as Ive nevel deal with this type of clutch before, it definately meets and excedes the hp requirement abit.

Thanks, Mark

http://cgi.ebay.com/ebaymotors/F1-RACING-STAGE-3-CLUTCH-KIT-91-94-SUBARU-LEGACY-TURBO-_W0QQcmdZViewItemQQhashZitem5d245b5064QQitemZ400041922660QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Edited May 23, 201015 yr by T'subaru

if your trany is from a NA car with a cable clutch it will not work.

 

the EJ20G uses the same clutch as the WRX, but if you have a cable trany you need a clutch for a cable trany.

 

Turbo tranys are Hydro and need a pull type pressure plate

NA tranys are cable and need a push type pressure plate

and if you need an NA clutch its easier to find one for a 97-99 impreza 2.5 rs

if your trany is from a NA car with a cable clutch it will not work.

 

the EJ20G uses the same clutch as the WRX, but if you have a cable trany you need a clutch for a cable trany.

 

Turbo tranys are Hydro and need a pull type pressure plate

NA tranys are cable and need a push type pressure plate

 

My trany is from a na legacy, I'm glad I asked..and thanks for the replys