Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

trailer wiring plug

Featured Replies

where is the plug for the trailer wiring harness on a 1997 impreza outback sport ???? i cant find it

.... ModuLite Tow Ready Circuit Protected Taillight Converter with 4-Flat End, part number 119175. The ModuLite is supposed to help protect the car's wiring in case of a short in the trailer wiring, and I doubt that the JC Whitney harness would have much more than a fuse.

 

I used a similar harness (that I bought from an auto parts store back in 1996). This was for my 1996 Legacy L sedan, which certainly did not have a connector to plug anything into. The module is helpful for separating out the turn signals and brakes.

 

I simply tapped into the tail light assembly. I don't exactly recall which wires I spliced into the harness pigtail, but I can take a look later and post what I did later. It wasn't difficult, but it isn't nearly as elegant as plugging into the factory harness.

where is the plug for the trailer wiring harness on a 1997 impreza outback sport ???? i cant find it

 

it may not have one, the legacy doesn't. just the outback in the late 90s.

 

but if it is there it is behind the left rear tail light bulb access panel.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.