My 0743 code is coming back.

Well lets update the story...

 

-thought this was fixed because I did my headgaskets and while jacking up the tranny with a supporting plank of wood the tranny pan cut the blue wire. The code was coming up and found the wire issue when I dropped my tranny pan. I am really sure I got a good solder fix and bent pan flat.

 

The code is coming back on but not right away like before. It will stay off but when I start the car sometimes the code comes back on. I check my #4 and 6 pins on the connectors and check all three before I dropped the pan.

 

Any ideas guru?

 

thanks

Mike

With another code clearing session the CEL is off for a whole day. Hopefully the story ends here.