Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

...Q's about ECM code and No Dash or Running Lights

Featured Replies

1983 brat with hitachi and A/T

1st :-\

I need help with a ECM code 22...... vehicle speed sensor

 

 

where is it ? how do in check it ? or replace it?

 

 

2nd:-\

i have no dash lights or running lights.....

fuze #12 blows when installed

 

 

Where do i start to look to find short???

 

 

Any help Would be Greatly Appreciated

  • Author

NO one has ideas?

or do you..like me...... just do not know!!

grrr:-\

To get you started,my 83 owners manual shows fuse 12 feeding the ignition coil and fuel pump.

 

Suggest you get a circuit breaker to sub for the fuse for testing purposes.

Tailights are on fuse 11.Look for power here.

 

VSS is on the back of the speedo w/the cable.

Take the following w/a grain of salt as it is based on an 84 FSM,not 83.

Likely the same,but,who knows?

 

For starters,locate the 4 pin pink and 17 pin yellow check connectors under the left side of the dash.

Put your voltmeter between the yellow/red wire in the 4 pin and the black/red wire at one end of the 17 pin.

You want to see more than 2.0 volts.

If less,unplug the instrument panel and try again.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.