she is a 150cc and so far I have had her to 55mph on my street! shouldn't be long before she is insured and on the road.

 

I cant handle that much chrome in one package... so I partially murdered it out

 

 

I won't bother commenting on my experience with Chinese internal combustion engines, But I really like the de-blinging of it.

It looks good!

You could get some tune out of a pipe and a jet kit. some of these chinese bikes are cloned honda designs. Yours may be a 139 qmb engine, i think from the honda aero scooters in 80 and 150 cc displacements.

 

If your scoot gives you trouble, you may be ale to swap genuine honda parts to it.

 

i have a 50cc bersion that i made a head gasket from a pabst blue ribbon can, and put a .090 jet in it, and cut off the muffler and made a sea foam can muffler. I notched the variator for more gear, and lost 2 of the weights for quick variation. Mine will do 40 towards 45, although it takes a little time past 35. but this thing did 27 mph to begin with. I would think your bike is capable of 80mph or better with gearing mods

I have daily experiences with chinese internal combustion engines! I run a chinese atv/scooter parts department, and not some two bit dealer, I work for the manufacturer owned importer! Miles if you need parts, let me know. I already have a cheater 50cc scoot, which is really a 63cc from the factory, and all I did to it was an 88 main jet and 6.5g dr.pulley sliders and I have had her to 53mph on flat land. that was a really long straight normally she will do about 47.