Rooster2 Posted February 10, 2012 Share Posted February 10, 2012 An engine weighs about 200#. I recently took a Subie 2.5 motor to a wrecking yard as scrap. Surprised when a skinny young guy lifted the engine up by himself from the tailgate area of my OBW, and placed it in the scoop of a front end loader. Makes my back hurt just thinking about what he did. Good luck on installing your new motor. Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 10, 2012 Author Share Posted February 10, 2012 Yep, they're kinda tiny. The block by itself you can pick up and carry around without much trouble. Festiva! I drove one of those for a few months. It was a go cart with a tin shell, it was so much fun to drive! It would burn clear through third gear in the rain. Mine burns through all gears in the rain ^^^ Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 13, 2012 Author Share Posted February 13, 2012 Progress has been made... had it out within a few hours of getting it in the garage. Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 16, 2012 Author Share Posted February 16, 2012 So I got it all back together the other night, but the new engine is junk. Sounds like theres no rod bearings in it. Found a 31k mile engine on car-part for $1300, and a 30k mile one for $1400. Im gonna find out if either place buys core/rebuildable engines since I now have two. Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted February 17, 2012 Share Posted February 17, 2012 Will the place you bought the "new" engine from take it back? I would tell them they better.... Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 17, 2012 Author Share Posted February 17, 2012 I wouldnt even try, I was told it had a knock and gambled on it being piston slap, and I dont really wanna go back to that place, it made me wish I had my concealed carry permit. I bought it for pennies compared to the "good" junkyard engines out there. Im probably looking at spending 3-4 times as much now for one thats guaranteed to be good/low miles. Quote Link to comment Share on other sites More sharing options...
jarl Posted February 18, 2012 Share Posted February 18, 2012 So I got it all back together the other night, but the new engine is junk. Sounds like theres no rod bearings in it. Found a 31k mile engine on car-part for $1300, and a 30k mile one for $1400. Im gonna find out if either place buys core/rebuildable engines since I now have two. For that amount you are not that far from a rebuilt engine with a warranty: http://www.ssisubaruspecialists.com/subaru-engine-remanufacturing-2/ They bought my EJ25 (which threw a rod) for a decent amount as well (that's the only contact I have had so far with them, BTW) Quote Link to comment Share on other sites More sharing options...
Rooster2 Posted February 18, 2012 Share Posted February 18, 2012 So I got it all back together the other night, but the new engine is junk. Sounds like theres no rod bearings in it. Found a 31k mile engine on car-part for $1300, and a 30k mile one for $1400. Im gonna find out if either place buys core/rebuildable engines since I now have two. If you bought the engine from a company verses an individual, I would think they would have warranted the motor. The wrecking yard I buy stuff from warrants everything for 30 days. If I have a problem, take the part back for an exchange at no cost. Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 18, 2012 Author Share Posted February 18, 2012 For that amount you are not that far from a rebuilt engine with a warranty:http://www.ssisubaruspecialists.com/subaru-engine-remanufacturing-2/ They bought my EJ25 (which threw a rod) for a decent amount as well (that's the only contact I have had so far with them, BTW) True, but the only way I will be able to afford that is if they can take both of my core engines for a bit of a discount. Its also a 5 hour drive. I'll check into it. Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 21, 2012 Author Share Posted February 21, 2012 Well they havent gotten back to me yet... must not like business too much. I might try "the sube shop" in Morgantown next. Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 26, 2012 Author Share Posted February 26, 2012 Sourced a very well running engine 5 miles from where Im working on the car, for a good price at that. Knocker is already out, less than two hours, these things are so easy to pull. Good engine should be in tomorrow. Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 28, 2012 Author Share Posted February 28, 2012 Well the good engine is in and it does run great, but now the clutch wont fully disengage! Seriously! Im going nuts here! Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted February 28, 2012 Share Posted February 28, 2012 Well obviously there has to be something wrong. I mean, if the clutch worked correctly the engine would be knocking. Unplug a light bulb or cut one of the seat belts. Then nothing else will go wrong. :-p Just kidding. Is the pedal spongy? Or does it feel like the release point is just too low? Quote Link to comment Share on other sites More sharing options...
bhazard Posted February 29, 2012 Author Share Posted February 29, 2012 The disc was messed up. Possibly happened when I put it back together. The hub was pushed back so it was sticking out of the other side of the disc. Car is now running and driving Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.