Hitoshi Posted June 30, 2012 Share Posted June 30, 2012 Hey guys, I'm hoping to get a little advice. I'm switching out the Weber/Carter 1bbl carb and putting in a weber. I bought an intake manifold that had a custom Weber adapter welded/bonded to it. Well when I went to see what it would look like when I put on the Weber I noticed that it wasn't going to clear the spark plug wires and the contacts on the distributor. I measured from the intake, the size of the spacer thing w/gasket and it was about 5/8". It looks like I'll need another 1/2" or so to clear so about 1 1/8" total. Does that seem right? Link to comment Share on other sites More sharing options...
Hitoshi Posted July 18, 2012 Author Share Posted July 18, 2012 Tried to drill out the studs when I couldn't remove them but there was some sort of bonding agent so I ended up just removing the custom plate entirely. I ended up getting the Redline adapter. Which from besides the gaskets not really lining up works well. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now