CaptainRon Posted April 1, 2004 Share Posted April 1, 2004 I am having trouble with turning. Seems like the wheel does not want to return back to center. The steering pump seems fine with no leaks & the belt is pretty new. The weird part is with a full tank of gas the steering seems fine. Ball joints? Tires? ???? Any ideas???? Recent work done in the past 6 mos: Head gaskets Water pump Timing belt Struts Frt Rotors/Pads Link to comment Share on other sites More sharing options...
ejlain Posted April 2, 2004 Share Posted April 2, 2004 I would check the tires. All the same? Properly inflated? Good condition? Balanced? Also, check power steering fluid level. Start there and see if it's something minor. On the major side, I guess the steering rack might be a possibility. I am sure you'll get lots of other ideas from members here. Keep us posted. Ed Link to comment Share on other sites More sharing options...
cookie Posted April 2, 2004 Share Posted April 2, 2004 it on jackstands. Then I would try turning the wheels manually to see if there was play or a frozen ball joint. Then have a friend try turning the steering wheel while you inspect the action. If you don't find low air in the tires, low power steering fluid, or something rubbing or frozen have a more qualified person help you diagnose it. Link to comment Share on other sites More sharing options...
Chip Posted April 3, 2004 Share Posted April 3, 2004 I had kind of the same problem and it turned out be the u-joint on the steering shaft. A couple shots of WD-40 and things were fine.The joint is about 1 ft in front of the firewall...in the engine compartement. Link to comment Share on other sites More sharing options...
cookie Posted April 5, 2004 Share Posted April 5, 2004 I have heard of a couple of people having it get loose too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now