Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

re:ac belts, 1990 Loyale Wagon

Featured Replies

Hi, this is my first time posting, but I've got a real problem here.

 

I own a 1990 Subaru Loyale Wagon, bought it with 120,000 miles and have since put on another 30,000. The last owner treated it pretty well, but did alot of the repairs himself, and not very well. On a trip up to the Rockies 6 months ago, it threw the timing belt and I was stranded. Long story short, had it towed to a nearby town and ended up spending 2 nights in the mountains while I waited for the par to show up and the labor to be done. In doing the labor, most of the front half of my car had to be removed and then re-installed in order to access the timing belt casing. When it's all said and done, I've spent about $700. 2 months later, a bearing in one of the pulleys that the ac belt runs on seizes, the pulley freezes, and burning rubber smoke is coming out from under the hood. My poor wife was driving and was able to limp the last mile and a half home, but was literally scared out of her wits that the car might explode on her or something. Anyway, had the pulley replaced, had the belts replaced, good as new right? Wrong, in the last 3 months have had to replace the ac belt twice, both times getting stuck on the side of the road.

 

My question is: could the labor that was done to replace the timing belt have resulted in something in the assembly to be a little off, resulting in my ac belts constantly shredding?

 

Please reply, I need to know, before I go chasing this mechanic down.

 

Steven

Sounds more like a problem with the compressor to me - too much drag? Which pulley got the replacement bearing? And were the other components tested for spinning freely?

same thing happened to my dad's taurus, the compressor had gone bad and kept shredding the belts. bitch of a repair since the AC system on th 1990 loyale uses r12 coolant and most shops (at least the ones around dc) won't do the fix unless they convert your system to r134a coolant (not cheap)

Conversion is cheaper than buying R12 at current prices! Glad I still have a little can stashed away from bygone years when they cost $3!

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.