92LoyaleH4 Posted January 29, 2013 Share Posted January 29, 2013 This one has got me annoyed to start this off... I CANNOT:banghead: find anything online at local stores or anything. Granted running one belt seems to not be an issue but i'd feel better with both as was intended. Simply, where do I find this pulley and the hardware associated with it. (I.E. Everything but the actual bracket) Thanks!!!! Quote Link to comment Share on other sites More sharing options...
ShawnW Posted January 29, 2013 Share Posted January 29, 2013 Can't just replace the bearing? Pull the retainer clip and put a new bearing in? The bearing is pretty generic. Maybe I am not visualizing with the photo right but it looks like enough of the part is ok to me. Quote Link to comment Share on other sites More sharing options...
subynut Posted January 29, 2013 Share Posted January 29, 2013 I replaced the bearing in one of those pulleys when I was tracing a bearing noise. I still have it, it has about 5000 miles on it. I just recently pulled it because I am doing an EJ swap in that wagon. Quote Link to comment Share on other sites More sharing options...
92LoyaleH4 Posted January 29, 2013 Author Share Posted January 29, 2013 I replaced the bearing in one of those pulleys when I was tracing a bearing noise. I still have it, it has about 5000 miles on it. I just recently pulled it because I am doing an EJ swap in that wagon. i would do that...but it appears to be damaged (The bolt) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.