Jump to content
Ultimate Subaru Message Board

Western Canadian subie owners


Recommended Posts

UPDATE

patched the crashed rad with jb weld , tested it ith air and put it in todayfor when it is running

      then tried a dist test with light from neg on dist [ blue yel wire] to ground suggested by Cougar:

#6 [Loyale - No Spark: post #6] Cougar
 
   Posted 01 May 2013 - 07:33 PM
JIM                                        do this test::   JIM
Those wire colors are correct I think. Using a test light probe check to see if you have light pulses on the minus side of the coil while you crank the engine. If the light is steady ON then there is a possible problem with crank sensor. If there is no light then the coil has an open wire
Nov 7 tested it- no light or pulse   - change coil
Tried it- no light or pulse so if no snow tomorrow will change the dist and try again
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...