Jacks Posted October 10, 2014 Share Posted October 10, 2014 Hello all, My sons Legacy wagon. We put on new rotors and pads on all corners, bled em out. Can't get good pedal and the ABS light comes on. We bled them clean. The rears are rubbing and as an old school muscle car guy Im a bit puzzled? Maybe the master has an internal leak? Ideas? Thanks Quote Link to comment Share on other sites More sharing options...
rdweninger Posted October 10, 2014 Share Posted October 10, 2014 if it is a manual trans and has the hill holder, you need to push the clutch in when bleeding right rear and left front. I just pin my clutch to the floor and do a 4 corners. I use a vacuum bleeder at the wheel. Quote Link to comment Share on other sites More sharing options...
Jacks Posted October 10, 2014 Author Share Posted October 10, 2014 Its an auto. Thanks tho. Quote Link to comment Share on other sites More sharing options...
azsubaru Posted October 11, 2014 Share Posted October 11, 2014 I don't know if this fits your situation, but whenever I've had those symptoms, I had to benchbleed the master cylinder. Quote Link to comment Share on other sites More sharing options...
Jacks Posted October 11, 2014 Author Share Posted October 11, 2014 Yeah, I am thinking time for a new one. Just bled em again, no help. Thanks Quote Link to comment Share on other sites More sharing options...
MilesFox Posted October 11, 2014 Share Posted October 11, 2014 I have had to deal with failed master cylinders in 90's subarus seems like in a row with 2 of them and a spare installed as a replacement being failed as well. Practice dual diagonal brake bleed. Good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.