Nick Leigh mtb Posted May 19, 2004 Share Posted May 19, 2004 I am replacing the distributor on my RX. I cant seem to get it off. I have never taken it off of this car before but on other cars they come right out. Any hidden bolt or thing i need to remove from the bottom beice with the ignitor thing? Link to comment Share on other sites More sharing options...
calebz Posted May 19, 2004 Share Posted May 19, 2004 There are 2b bolts that hold the distributor down, instead of just one like many other cars..pull those two, grab, twist and pull, it should pop right out. Link to comment Share on other sites More sharing options...
Nick Leigh mtb Posted May 19, 2004 Author Share Posted May 19, 2004 it's not poping it doesn't twist the rotor itself doesn't rotate while trying to turn over the engine either ? Link to comment Share on other sites More sharing options...
calebz Posted May 19, 2004 Share Posted May 19, 2004 Rotor not turning usually means broken drivers side timing belt. Are you sure you have both bolts off the distributor? Link to comment Share on other sites More sharing options...
Nick Leigh mtb Posted May 19, 2004 Author Share Posted May 19, 2004 i have both bolts off. where could i get one and how much would an electrical ignition be? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now