Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Clutch Shudder

Featured Replies

Why does my 2001 Impreza RS clutch shudder when starting off in low gear..........sometimes? It has done it since 2002. A new clutch lasted about 2 weeks before it started again. I'm about to install in another EJ25 from a 2001 Forester with 58K miles on it and new head gaskets in it.  I'll install a new clutch also. Any words of wisdon.

 

  • 3 weeks later...

Welcome to the USMB.

 

Clutch shudder can be caused by several things including driving style. However one of the mechanical things that can cause it is a worn snout on the transmission. The throw out bearing rides on this and if it's worn or grooved it can allow the clutch to not be in the proper alignment.

 

This kit was made to help solve the problem.

 

http://www.pdmusa.com/

  • 1 month later...
  • Author

Welcome to the USMB.

 

Clutch shudder can be caused by several things including driving style. However one of the mechanical things that can cause it is a worn snout on the transmission. The throw out bearing rides on this and if it's worn or grooved it can allow the clutch to not be in the proper alignment.

 

This kit was made to help solve the problem.

 

http://www.pdmusa.com/

The snout on the transmission has a steel sleeve on it from the factory and it is in perfect shape. A new clutch and pressure plate worked perfectly for about 3 weeks. There is no oil around the rear seal but everything inside the bell housing is coated with a fine film of what appears to be combustion deposits. Now in the process of swapping engines for one with new head gaskets and only 54K on it ....... with a very clean bell housing.

Check your mounts, motor and trans. Make sure they are attached, I had this happen once, it ended up being the motor mounts had both sheared off and the trams mount was all that was holding it in place

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.